Mateksys Power Module 12S (3xBEC)

Deze Matek Power Module 12S is een krachtige voedingsmodule die hoge spanning en stroom aankan (9-55V in, 15A stroom). Het heeft meerdere hoge capaciteit uitgangen (5V/4A, 12V/4A) en een instelbare uitgang met 15A continue stroom, 25A piek. Het bord heeft ruimte om een XT30-connector (niet meegeleverd) toe te voegen voor de voedingsingang.

Specificaties
• Wide 9V to 55V Operating Input Range with TVS protection
• 3x independent Step-Down Voltage Regulators
• BEC Vx, 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.
• BEC 5V (Fixed), 4A continuous
• BEC 12V (Fixed), 4A continuous
• 1K:20K voltage divider built-in (Volt = 1/21 Input voltage)
• Current sensor signal passthrough pad

BEC Vx
• Output voltage 5.25V / 6V / 8V options.
• Output voltage tolerance 1.5%
• Synchronous switching step-down (or buck) regulator with typical efficiencies of 90% to 96%
• Supports typical continuous output current of up to 15A, Peak current of up to 25A.
• Output ripple 32mV (VIN=50V, Output 5.25V @ 15A), 43mV (VIN=50V, Output @ 5A)
• Standby current: 10~20mA
• Reverse Input voltage protection: No
• Thermal Shutdown
• Output Short-circuit tolerant (2 seconds)
• Overcurrent protection & self-recovery
• Tip: Input voltage >= 15V is required for continuous output current of 15A

BEC 5V
• Output voltage 5.2V, tolerance 1.5%
• Supports continuous output current of up to 4A, Peak current of 6A
• Output ripple 20mV (VIN=24V, Output @ 5A), 50mV (VIN=50V, Output @ 5A)
• Reverse Input voltage protection: No
• Thermal Shutdown
• Output Short-circuit tolerant (2 seconds)
• Overcurrent protection & self-recovery

BEC 12V
• Output voltage 12V, tolerance 1.5%
• Supports continuous output current of up to 4A, Peak current of 6A
• Output ripple 18mV (VIN=24V, Output @ 5A), 32mV (VIN=50V, Output @ 5A)
• Reverse Input voltage protection: No
• Thermal Shutdown
• Output Short-circuit tolerant (2 seconds)
• Overcurrent protection & self-recovery
• Tip: Input voltage >= 13V is required for stable 12V output