Mateksys F405-WING V2 Flight Controller

Specificaties

• MCU: STM32F405RGT6, 168MHz , 1MB Flash
• IMU: ICM42688-P
• Baro: DPS310
• OSD: AT7456E
• Blackbox: MicroSD card slot
• 6x UARTs, 1x Softserial_Tx option(INAV)
• 10x PWM outputs
• 2x I2C
• 3x ADC (VBAT, Current, RSSI)
• Built in inverter for SBUS input
• USB Type-C(USB2.0)

FC Firmware
• ArduPilot: MatekF405-Wing (ArduPlane 4.4 or newer)
• INAV: MATEKF405SE (INAV 6.0 or newer)

PDB
• Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
• Current Senor: 220A, 3.3V ADC (INAV scale 150, ArduPilot 66.7A/V)
• Sense resistor: 100A continuous, 220A peak
• Battery Voltage divider 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)

BEC 5V output
• Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
• Continuous current: 2 Amps

BEC 9V /12V output
• Designed for Video Transmitter, Camera, Gimbal etc.
• Continuous current: 2 Amps
• 12V option with Jumper pad
• for stable 9V/12V output, input voltage should > output voltage +1V

BEC Vx output
• Designed for Servos
• Voltage adjustable, 5V Default, 6V or 7.2V options
• Continuous current: 5 Amps, 6A Peak
• for stable Vx output, input voltage should > Vx voltage +1V

BEC 3.3V output
• Designed for external 3.3V peripherals
• Linear Regulator
• Continuous current: 200mA

Afmetingen
• Montagepatroon: 30.5 x 30.5mm (Φ4mm with Grommets Φ3mm)
• Afmetingen: 54 x 36 x 13 mm
• Gewicht: 25 gram